State-Of-The-Art Complete used PV Solar panels Production Line for photovoltaic solar panels (Robert Bürkle GmbH) - Year 2017

REF. CP-1010 IN GOOD WORKING CONDITIONS

Complete used PV Solar panels Production Line for photovoltaic solar panels (Robert Bürkle GmbH) - Year 2017 FOR SALE

State-Of-The-Art Used Photovoltaic (PV) Solar panels production line (Robert Bürkle GmbH) from 2017 produce at an annual capacity of 130 MW for the long-term interest of customers. “Quality” is at the center of all processes, from the design of the panels to the raw materials used, from production to control and testing.
The factory started with an untouched production philosophy in Industry *4.0 Standards, producing the highest quality photovoltaic module integrated with the industry’s best machine park, a fully automated production line such as Team Technic Stringer, ATN Automatic Soldering, Bürkle Laminator.

Description:
Line was producing up to 250 panels in 8 hours: 72-cell panels, solar cell size 1.99 x 1 m.
Power per panel: 400 watt
Number of cells in panel: 72 pcs.
Type of cells: mono perc
Number of busbars: 5 bb
Annual production capacity: 130 MW
Up to 5BB and size 158,75mm x 158,75 mm cells
Under power and available for inspection
In good working condition
Available as a whole or individually
Year: 2017
Voltage/Frequency: 400V / 50 Hz
Line stopped 4 month's ago.
The most common panel type which has been produced is solar panels with 400 Watt power output and 72 pcs Mono PERC cells. The area of each panel is 1,99 M2. In this case energy is 201 Watt/M2 for THIS TYPE of product.

The line can be adapted to 6-BB production at minimal cost, and there is also an option to upgrade the stringers to 9-BB production if required.

Line is in good working conditions”

Pictures and Layout available on request.

TECHNICAL SPECIFICATIONS:
EQUIPMENT LIST OF THE MODULE LINE:

1 RIMAS 1 PC. AUTOMATIC GLASS LOADING MACHINE
2 RIMAS 1 PC. GLASS WASHER
3 ROBUST 1 PC. FOIL CUTTER
4 RIMAS 1 PC. CONVEYOR BELT INTO STRINGER
5 TEAM TECHNIK
2 PCS. STRINGER TT2100 + LAYUP CONSISTING:
TT2100 STRINGER
- CELL BUFFER
- FLUXING OF CELLS
- CELL HANDLING WITH ROBOT
- FEEDING OF RIBBONS
- TRANSFER OF RIBBONS AND HOLD-DOWN DEVICE
- STRING TRANSPORT
- IR-LIGHT SODERING
- LOADING BACK OF HOLD DOWN DEVICE UNITS
- BACK TRANSFER OF HOLD DOWN DEVICE
- FLIPPING STATION FOR STRING
- BASE FRAME WITH SAFETY GUARDING FOR STRINGER
- CONTROL UNIT
LAYUP SYSTEM - BASIC
- ROBOT SYSTEM
- TRAYS FOR STRINGS
- GLASS FEEDING AND POSITIONING
- SAFETY GUARDING FOR LAYUP
- CONTROL CABINET FOR LAYUP
6 ATN XBUS-L13 1 PC. AUTOMATIC SOLDERING MACHINE
7 RIMAS 2 PCS. REPAIR TABLES
8 ROBUST 1 PC. AUTOMATIC EVA + BACKSHEET PLACEMENT MACHINE
9 MBJ 1 PC. EL TESTER
10 RIMAS 1 PC. LAMINATE LOAD SECTION
11 BURKLE
2 PCS. LAMINATOR
- INFEED BELT CONVEYOR
- SINGLE OPENING LAMINATION PRESS STEP 1
- STAND FOR THE VACUUM PUMPS, INCL. ROOTS BLOWER
- HEATING UNIT
- SINGLE OPENING LAMINATION PRESS STEP 2
- HEATING UNIT
- BELT CONVEYOR FOR LAMINATION PRESSES
- COOLING UNIT
- OUTFEED BELT CONVEYOR
- THERMAL OIL PIPING AND INSULATION
- PIPING FOR VACUUM
- SAFETY FENCE
- PLC CONTROL
- REMOTE SERVICE SYSTEM
- PROCESS CONTROL SYSTEM
12 RIMAS 1 PC. LAMINATE UNLOAD SECTION
13 RIMAS 1 PC. FRAMER
14 MBJ 1 PC. LED TESTER
15 RIMAS 1 PC. FEED OUT CONVEYOR BELT FOR FINAL CLEANING AND INSPECTION
16 ASIC 1 PC. EL TESTER (INLINE SOLAR PANEL EL SCANNER)

*Standards for Industry 4.0

Industry 4.0 (i4.0) transforms the way enterprises manufacture products. Using a network of computers and data exchanges, processes are automated and production becomes more efficient. Standards are key to enable smart and autonomous technologies to operate in a seamless and secured way.

Contact Us