See also our Specific Platforms

Your internet platform for Used Krones Machinery from fillers, labeller, inspectors to blow mouldingYour platform of USED BREWERIES

YOUR DATABASE FOR USED AND SECONDHAND MACHINERY FOR BEVERAGES FOOD INDUStrY

USED KRONES PET HOT (and Cold) FILLING LINE (PARTIAL) FOR NON-CARBONATED JUICESFOR SALE


REF. P-23811 IN GOOD CONDITIONS

USED KRONES PET HOTFILL (and COLD) LINE (PARTIAL) FOR JUICES

This line can fill Juice with Slurry, pulp but separated fillers for both products.
You can fill plain juice too. CSD is NOT possible.


Make: KRONES
Capacity: 18.000 bottles/h at 1 l PET bottles (max. bottles diameter 98 mm)
25.000 bottles/h at 0,3 l PET bottles
Neck-finish: 38 mm Bericap
Year: 2011
Working hours: Approximately 19.600 hours
Availability: June 2020
Filling product: Juices at 85° C, pulp with particle size up to 6x6x6
Pack: 3x2 4x3
Control unit: Siemens S7 - 300

All machines prepared for UPS

Including the following:

Nitro-Hotfill-Blowing/Filling Block

Blow molding machine
Make: KRONES
Model: Contiform II H16 rotary blower
Year: 2011
with 18 blowing stations and 15 heating cases, oven pitch 50 mm;
Air Wizard IV (air recycling), base after-cooling, oil-heater
and chiller (KKT Kraus). HP Air expected demand : 2.242 m3/h for 1 L Bottles

Contifeed RS
Make: KRONES
Year: 2011
Inclusive tipper, chute, elevator, preform infeed, linear preform rinser

Linear Preform Rinser
Make: KRONES
sterilized air rinser expected demand 86 m3/h
Year: 2011

Bottle Inspector
Make: KRONES PET-View, camera system

Pre-Dosage-Filler
Make: KRONES
Model: 1.080-33-103
Year: 2011
timing fill, Fill and Blow-out, maximum predosing volume: 125 ml; corresponding with 10 % slurry content in 1 l bottle filling temperature: 85-90°C

Filler
Make: KRONES
Model: MODULFILL NWJ (VP-GW PET) 1.800-55-103
55 filling valves, pitch 103 mm, Neck handling, clean-room rate 7 corresponding DIN EN ISO 14644-1, Foam-Cleaning-System, Nitrogen-Droppler, automatic CIP-Caps, CIP-Media consumption 21,000 l/h, Capper SV 720-22-103 with 22 heads, Screw-Caps
Neck sterilizer of company
Year: 2011

Cap Feeder
Make: KRONES
Model: Dynasort DS Flatcaps 28-38 mm
Year: 2011

Cap Inspector
Make: KRONES
Model: Checkmat 731 S
Year: 2011

Fill level inspection unit
Make: KRONES
Model Checkmat FM-X, rejection with linear rejection unit (Ecopush)

Cooling tunnel
Make: KRONES
Model: Linacool C13.2-425-31
6 Zones, Treatment Area 55 m²
Year: 2011

Flash Pasteurizer 1 (Juice)
Make: KRONES
Model: VARIO FLASH H TPB 30
Year: 2011
tank Volume 10.000 l, Heating Temperature: 98°C,
Tubular heat exchanger, product is homogenized by means of high pressure

Flash Pasteurizer 2 (Slurry)
Make: KRONES
Model: VARIO FLASH H TPB 30
Year: 2011
tank Volume 750 l, Tubular heat exchanger,

Homogenizer

NOTE: Conveyors after COOLER LINACOOL is not with the line. Labeler, shrinkwrapper ,Palletizer and Pallet film wrapper is not with the line.

Pictures and videos on request


Just click on the contact bottom and request information

Copyright ©