YOUR MARKETPLACE FOR USED AND SECONDHAND MACHINERY - EQUIPMENT, IDLE ASSETS

USED PET BLOW MOULDING MAKE KRONES CONTIFORM H16 FOR HOT FILL - YEAR 2011 - FOR SALE

Reference Nr. B-23902

Used Stretch-blow moulder

Manufacturer: KRONES
Model: CONTIFORM S/H
Type: H 16
Year: 2011
Capacity used: 1,0 l @ 18.000bph and 0,3 l @ 25000bph
Neck: 38 mm Bericap
Operating: 15" color display with ZenOn visualisation
Electrical data:: 230/400V - 50Hz
Control cabinet: On machine with air condition
Control unit: Siemens S7 300
Machine still installed. Not in production anymore.

- Machine type: Rotary machine with 16 blowing stations for hotfill operation
- Process type of machine: for producing PET bottles for hot filling
- Heating module design: is configured according to the customer object data and values of machine output indicated in the document.
- Heating module type C2.1: heating module type HZM09 C2.1 with maximum 18 heaters
- Chain pitch: 50 mm - up to neck-ring diameter of max. 48.5 mm
- Number of heaters for the heating module C2.1: 18 PCE
- Type of production: inline; direct fillling after blowing
- Blowing air pressure: 38 bar
- Extended compressed air recovery: Air Wizard 4 - for internal reuse for pre-blowing, intermediate blowing and stretching
- Bloc selection: yes
- Relative humidity: 75 %

Cooling system for Contiform
- Cooling system: included in the scope of supply.
- The cooling system serves on the one hand to maintain the mould temperature during the blowing process.
- On the other hand it is necessary to cool the neck finish of the preforms during the heating process in the linear oven and to provide the required cooling capacity for a possible base cooling. The system works with cooling agent without CFC.
- Type of cooling: Air cooling
- Installation of cooling system: in the interior
- Cooling capacity at 32°C: 55,5 kW
- Cooling capacity at 37°C: 50,9 kW
- Distance cooling system: up to 15 m

Preform feed unit
Manufacturer: Krones
Model: CONTIFEED RS
Type of tipper: simple tipper
Length of preform silo: 2000 mm
Silo emptying in case of product change: manually by emptying flap
Silo cover: with pneumatic actuation
Design of conveyor: Cover on top
Design of return conveyor: cover on top
Length of roller orientor: 2500 mm
Design of infeed rail: with housing
Preform inspector: not included
Preform inner cleaning: with KRONES preform inner cleaning

IMMEDIATELY AVAILABLE


Contact Us