See also our Specific Platforms

  Your internet platform for Used Krones Machinery from fillers, labeller, inspectors to blow mouldingYour platform of USED BREWERIES
 

YOUR INTERNET PORTAL FOR USED AND SECONDHAND MACHINERY

 CANNING LINE FOR SOFTDRINKS  


Reference nr CL10101

For sale Used KRONES CAN FILLING LINE FOR SOFTDRINKS from 2014 Installed in 2015  with capacity 80.000 Cans/hour

Specification

Make: KRONES
Year: 2014 – Operational in 2015
Capacity: 80.000 cans/h refer to 330ml Base
                 80.000 cans/h refer to 330ml Sleek
                 66.000 cans/h refer to 500ml Base
Seam: 202 can seam

Filling product: CSD till 7,6g Co2/l (NO beer) and JUICES
Packing: Shrink pack 3x2 and 4x3
Further 24 tray pack in foil
Pallet: New can pallet 1300x1120mm
Product pallet 1200x1000mm
Control unit: Siemens S7
Voltage/Frequency: 400V / 50 Hz
Control cabinet: Separate located with doors and air condition
Language: English
Availability: Immediately

CONSIST OF THE FOLLOWING MACHINES

New can depalletizer

Make: KRONES
Model: Pressant Universal 1A
Discharge height + 5.400mm, duct machine, automatic falling
Safety for lifting device,
With pallet infeed, layer pad remover, cover frame remover,
2 x magazine, safety fence, can discharge

Can vacuum control

Empty can inspection

Make: KRONES
Model: Cantronic 709 D
Inspection of: Flansh, shape, inner site and bottom

Rinser

Make: KRONES
Rinsing channel length 8.770mm, infeed height 6.230mm,
Discharge height 1.230mm, rins medium water, with can turner

Filler

Make: KRONES
Model: Volumetic VODM-C 3.600-125-90
125 filling valves, pitch 90mm, valve parts in stainless steel,
Height adjustment filler bowl motorized, central bowl with agitator,
Steam Sterilization unit, Co2-consumption measurement

Seamer

Make: Ferrum
Model: F 12-1
with pressing and adjustable folding
Cam
With nitrogen injection (ISTE-CON 1) With cleaning room
With foam cleaning = 2 chemical products (alkaline/disinfection),
Flushing with hot water

Seam feeding

Make: CSW
Model: Mimi-Multifeeder 3

Filling height control

Make: KRONES
Model: Checkmat FM-G (without gamma source)
Detection of under filling and existing of seam
Measure bridge mechanical adjustable, error showing with optical signal, rejection
with distributor to a conveyor unit

Warmer

Make: KRONES
Model: Linatherm W6.4-2244-31
With PH-measurement, 1 deck with 2 zones, warming of cans to Round about 40°C (depend on filling temperature), heating with heat tube exchanger with automatic temperature regulation

2 x CAN control

Make: KRONES
Model: Checkmat 707 F-G (without gamma source)
Detection of under filling

2 x Dryers

Packing machine Nr 1

Make: KRONES
Model: Variopac Pro FS-9,
Capacity: 90 pulses/min
Foil handling, can infeed for single cans (10 lanes), equipped for
Printed foil, with shrinking tunnel

Packing machine Nr 2

Make: KRONES
Model: Variopac Pro TFS-7
Capacity: 70 pulses/min
Production of shrink tray
With carton magazine for tray, infeed for single cans and shrink Packs of packer 1, hot glue unit Robatech, equipped for printed Foil, with shrinking tunnel

Pre-orientation unit

Make: KRONES
Model: Robobox
For preparing of packs in right running direction for palettizer

Palletizer

KRONES
Model: Pressant PalBloc 1AJ
Pallet lift unit for lifting pallet to palletizing level, Jalousie-head, one lane pack infeed,
Pallet insertion, pallet control

Pallet safety

Make: ATLANTA
Model: Revolution HS
20 turning / pallet
Foil end welded thermally, pallet lifting unit for stretching product
With pallet, pallet discharge
 

Video, pictures  available on request.

Just click on the contact bottom and request information

 

 

 

 

 

Copyright © 2022