See also our Specific Platforms

  Your internet platform for Used Krones Machinery from fillers, labeller, inspectors to blow mouldingYour platform of USED BREWERIES
 

YOUR INTERNET PORTAL FOR USED AND SECONDHAND MACHINERY

 
 

BREWERIES, BREWERY PLANTSDAIRY LINESFILLING LINES FOR BREWERIES AND BEVERAGE INDUSTRYPET BOTTLING PLANTSPET INJECTION PREFORMBLOW MOULDING MACHINERY AND LINESFILLERS AND SCREWERS/CAPPERSBottle inspectorsLabelling machinesSHRINK WRAPPER FOR TRAY, PAD AND FILM, FILM ONLYEDIBLE OIL FILLINGWINE & VODKA FILLINGBOTTLE WASHERS FOR BEER AND BEVERAGE INDUSTRYPASTEURIZERSOTHER EQUIPMENT - INSPECTORS - FILTERS ETC.USED TANKS - CIP - CKT - BBTIf you have any question please feel free to contact us!
 

 

Some Customers

 

LINKS

 USEDBREWERIES

 

 

 

 DAIRY MILK FACTORY


R
eference nr D-22600

DAIRY - MILK FACTORY - capacity 500.000 Liter/day


- The daily production is 500.000 l/day. That means 20 hours production with 25.000 l/h and 4 hours for cleaning and sterilization of the lines.

- The factory produced standardized Milk, Cream with different fat contents, skimmed milk and milk concentrate with different dry contents. These products were used as semi-finished-product for ice cream plant and for other industries. They delivered only full trucks and don’t filled up milk or milk-products for the end-consumer.

- The plant has two pasteurization lines. One for milk (short time heating pasteurization) and one for cream (high heating pasteurization).

- For filling fresh milk in Tetra Pak you need the filling machines. They are not included in the offer; The Milk Factory produced only semi-finished-products.

- To produce UHT-milk you need a UHT-line. This is not included, but we can help you with this.

- This plant is the base for all milk products! When you want to produce Yoghurt, you must have a mix station. The products you can produce with this plant are the base for other products as yoghurt or cheese…
- For example: For yoghurt you need milk which has a higher dry content. This will be made with the concentration line. For producing cheese it’s the same base.

- You can produce 25.000 l/h raw milk. In 8 hours you can produce 200.000 l, but after that you must clean and sterilize the lines. This spends about 3 to 4 hours.

- The filling station of the milk plant has a capacity of 2 x 40.000 l/h. This has the reason that you can quicker get the raw milk into the system and so you have no problems with the centrifuge and pasteurization lines.

- When you install a bigger pasteurizer you can increase the capacity. But the centrifuge has a limited capacity of 25.000 l/h. But everything is possible. The semi-finished products were directly put in storage tanks or filled up in trucks.

- The storage tanks are: 2 x 100.000 l raw milk tanks or process tanks (isolated), 1 x 80.000 l raw milk tank (isolated), 1 x 100.000 l for exhaust vapor (isolated), 1 x 50.000 l cream tank (double jacketed and ice water cooling), 1 x 50.000 l concentrate milk tank (double jacketed and ice water cooling).

- The equipments are complete. Also this factory have a super modern process control system which you can grove up in a very easy and fast way.

- The factory stopped in summer 2009.

We can help you to find the right machines for the products you think about.

 
Location: EUROPE. PLANT IS IN EXCELLENT CONDITIONS!

Just click on the contact bottom and request information

 

See more pictures:  2  -  3


 

 

© Quotron Copyright © 2003 - 2012