See also our Specific Platforms

  Your internet platform for Used Krones Machinery from fillers, labeller, inspectors to blow mouldingYour platform of USED BREWERIES
 

YOUR INTERNET PORTAL FOR USED AND SECONDHAND MACHINERY

 

 

COMPLETE PLANTSBREWERIES, BREWERY PLANTSCANNING LINESCONVEYORSDAIRY LINESFILLING LINES FOR BREWERIES AND BEVERAGE INDUSTRYPET BOTTLING PLANTSPET INJECTION PREFORMPET BLOW MOULDING MACHINERY AND LINESFILLERS AND SCREWERS/CAPPERSBottle inspectorsLabelling machinesSHRINK WRAPPER FOR TRAY, PAD AND FILM, FILM ONLYEDIBLE OIL FILLINGWINE & VODKA FILLINGBOTTLE WASHERS FOR BEER AND BEVERAGE INDUSTRYTUNNEL PASTEURIZERS - COOLING TUNNELS - FLASH AND TUBULAR PASTEURIZERSOTHER EQUIPMENT - INSPECTORS - FILTERS ETC.COMPRESSORSPALLETIZERS - DEPALLETIZERSTETRA PAK LINESFILTERSUSED TANKS - CIP - CKT - BBTIf you have any question please feel free to contact us!

 

 

 

 

LINKS

 USEDBREWERIES

USEDSIDEL.COM

 

 

 

 

 HUSKY 90 RS35/35  YEAR 2000 - INSTALLED 2005 


Reference nr PI-23863

HUSKY PET INJECTON PREFORM MACHINE

Make: HUSKY
Model: S90 RS35/35
Build date: 07/07/2000 - Installed 2005


Less than 2000 hours production.
8 cavity mould 4,4g preform

English documentation
English identification plates
Transformer for 415V +/-10%
UPS for the PLC
Tropicalisation for motor, electrical panel and screen.


S90- Metric 1
Clamp
Clamp Force kN 900
Tiebar Spacing(HxV) mm 450x450
Platen Size (HxV) mm 590x590
Clamp Stroke² mm 360/650
Shutheigh (Min-Max) mm 200/500
Daylight mm 850
Ejector Stroke mm 120
Ejector Force kN 35
Tiebar Diameter mm 71.5
Full Stroke Dry Cycle3 s 1.3
Cycle Time Contribution4 s 0.9

RS Injection Unit RS35
Working Capacity 249
Screw Diameter mm 28
Screw L/D 5 25:1
Injection Pressure bar 2531
Injection Stroke mm 160
Injection Capacity cm³ 99
Injection Capacity gPS 93
Barrel Heats kW 7
DRIVE
Screw Torque Nw 148
Screw Speed RPM 763
Screw Speed (surface) m/s 1.1
Screw Drive Power kW 12
Plasticsizing Rate 6 g/s 16.5
Inst Motor Power kW 30
Standard Injection Rate 7 cm³/s 201
High Speed Injection 8 cm³/s 533

High Torque Drive
Screw Torque Nm 242
Screw Speed RPM 468
Screw Speed (surface) m/s 0.7
Inst Motor Power kW 30
Standard Injection Rate 5 cm³/s 201
High Speed Injection cm1/s 533

 

The injection press has been equipped with a drying system made by Plastic Systems.
This system comprises:

Drying system:

* Air dehumidifying dryer, twin-bed desiccant molecular sieve units, DR100HT model, suitable for moisture absorption from hygroscopic granules;
* Drying hopper, H100-PET model, for the main material dehumidification to be installed on the machine throat. The 100 lt hopper volume has been designed for a residence of 6 hours.
* 3-phase hopper loader, P1-L10 model, suitable to convey paltice granules.

Mould air dehumidifying system:

* Mould dehumidifying system, DS600 model, suitable to blow dehumidified air on the mould surrounding to avoid condensation.
* Mold enclosure made from aluminium beams and polycarbonate panels;
* ‘T’ Belt conveyor belt suitable to convey the preforms to the storage octabins.
 

Just click on the contact bottom and request information

 

 

 


 

Copyright ©