PET BLOW MOULDING AND INJECTION PREFORM PET MACHINES

Reference nr B-23883

BLOW MOULDING SIDEL SBO 10/14 YEAR 1988/1994 Capacity 10000 bph. FOR HOTFILL Machine in in very good conditions. quick change mould system. Neck 38 mm and 43 mm. Location Europe. Immediately available. Machine still installed. See further details: CLICK HERE

Reference nr B-23884

BLOW MOULDING SIDEL SBO 6/10 YEAR 1991 Capacity 6000 bph. FOR HOTFILL with quick change mould system. Neck 38 mm and 43 mm. Location Europe. Immediately available. Machine already dismantled. See further details: CLICK HERE

Reference nr B-23889 EXCELLENT CONDITION ***

SIDEL SBO 6 SERIES 2 - YEAR 2000 - Maximum Output 9.180 bph. Immediately available. Machine is with quick change moulds. Number of heating modules: 6 - Number of heating zones per module: 9 - Moulds are not included. Machine is PCO 28 mm.

Reference nr B-23884 EXCELLENT CONDITION ***

ADS G63 C Stretch Blow-Moulding Machine YEAR 1999 - Capacity 2.400 bph Including 1 set of moulds 1.5 lt . In very good conditions. -. Immediately available. Location: EUROPE. For pictures Click here

Reference nr B-23907

SIDEL SBO 4 Series 2 Year 2004. ONLY 200 working hours !! Capacity 1.600 bottles per mould. With Quick Change Mould System with preform feeder. In excellent conditions. See further pictures CLICK HERE

Reference nr B-23886 EXCELLENT CONDITION ***

SIG BLOMAX SERIES III - 16 YEAR 2003. 16 cavities - Capacity 28.500 bph. Immediately available. For pictures Click here

Reference nr B-23897

SIPA SF4000 year 1999. including 1,5 liters bottle mould and liters bottle mould. neck type 28mm PCO / GMP (to be used for soft drinks, mineral water, juce) - the machine is in perfect conditions and still in production. Production 4 000 bph (depending on capacity and raw material) . For pictures Click here

Reference nr B-23933

USED SIDEL SBO 24/24 year 1991 Capacity 20000 - 24000 bph, working hours 90000 heures only 2 L SW. Machine available first week of september 2008.

Reference nr B-23934

USED SIDEL SBO 24/24 year 1991 Capacity 20000 - 24000 bph, working hours 85000 heures , quick change 3 size possible 1.25L / 1.5L / 2 L.. Machine available first week of september 2008. See further pictures CLICK HERE

Reference nr B-23900 SPECIAL OFFER

ADS G 66 Year 1997, with the following moulds: for carbonated 1.25 L -0.50L-0.33L -0.25L - for non carbonated (mineral water): 1.50 L – 0.50L Working hours: 17300. CAPACITY 6600 BPH. immediately available. For pictures Click here

Reference nr B-23930 SPECIAL OFFER !!

SIPA ECS 6000/24 PET INJECTION -BLOW MOULDING, Year 1997, Capacity 6000 bph, for PET 0.5 - 1 lt and 1.5 lt. In very good conditions, still connected to the line - In production till end of June 2007. Possible to buy also the auxiliaries: compressor is complete of tank, air dryer MTA, water cooler etc. For pictures Click here PRICE EX WORKS: EURO 90.000, as is - where is.

Reference nr B-23901

SIDEL SBO 10FL - YEAR 1988 have been used for juices - Neck 38mm. In VERRY GOOD conditions . See further pictures CLICK HERE

Reference nr B23886

KRUPP CORPOPLAST TYPE B 80 YEAR 1992 Immediately available. Location: EUROPE. For pictures Click here

Reference nr B-23887 SPECIAL OFFER

ADS G66 YEAR 1999 with Tricool TRIM 70 HA Chiller with compressor BELLIS & MORCOM TYPE VH9H3N 40 BAR OIL FREE YEAR 1999, with Denco Dryer and ILVA air receiver. Capacity 6.600 bph. Include the following moulds: 4 x Edible oil bottle molds (375ml/500ml/2x750ml) (30/22mm neck with snap on cap) 3 x Water bottle molds (500ml/1500ml) (30/25mm neck with screw on cap) - 2 x 2Lt CSD bottle mold (28mm neck with a screw on cap) . In very good conditions. For pictures Click here

Reference nr B-23903 SPECIAL OFFER

ADS G62 B Stretch Blow-Moulding Machine YEAR 1995 - Capacity 2.400 bph , including 40 bar Make Hatlapa compressor, MTA Dryer, chiller and 6 moulds (330 m - 2000ml)
Machine can be inspected in production. In very good conditions. - approx 12.000 hrs. Immediately available. Location: EUROPE. For pictures Click here

Reference nr B-23888

USED SIPA SF 12/6 Year 2002. Available November 2007. Include also Atlas Copco compressor chiller etc. Machine in excellent conditions - Still in production. For pictures Click here

Reference nr B-23890

SIDEL SBO2/3 year 1994. Including one Fluid cooling system for compressor and one INGERSOLL RAND PETSTAR 310 comporessor, unused year 2003. Machine with mould compensation. Click here for additional information. POSSIBLE TO BUY THE SBO2/3 MACHINE ONLY WITH HOPPER AND PREFORM LOADER.

Reference nr B-23931

SIDEL SBO10/10 year 1996. Hot fill blow moulder complete with feed conveyer with hopper & unscrambler , outfeed conveyors & relating sections , 40 bar V15 Bellis & Morcom compressor with after cooler and dryer and receiver. 600 ml bottle blow screws & assorted spares. Running hours: 47,000 Hours. Immediately available. Location Australia.